GROUP

 

Cyclone separators

A high speed rotating (air)flow is established within a cylindrical or conical container called a cyclone. Air flows in a helical pattern, beginning at the top (wide end) of the cyclone and ending at the bottom (narrow) end before exiting the cyclone in a straight stream through the center of the cyclone and out the top. Larger (denser) particles in the rotating stream have too much inertia to follow the tight curve of the stream, and strike the outside wall, then falling to the bottom of the cyclone where they can be removed. In a conical system, as the rotating flow moves towards the narrow end of the cyclone, the rotational radius of the stream is reduced, thus separating smaller and smaller particles. The cyclone geometry, together with flow rate, defines the cut point of the cyclone. This is the size of particle that will be removed from the stream with a 50% efficiency. Particles larger than the cut point will be removed with a greater efficiency, and smaller particles with a lower efficiency

 

Types of cyclone we manufacture:

 

1. Single Cyclone separators

2. Treena cyclone separators

3. Multi Cyclone  separators

 

 

Global Envro AIR Systems(P)LTD

Global Technologies

Global Metallurgicals

Global Impex

Global Enviro Group Companies

Copyright 2014, Global Enivro Group